Wasp and Hornet Nest Removal Kit

Product Summary:

This kit provides you with all of the products needed to remove an exterior wasp nest from an area.

Included In The Kit:

1) Doktor Doom Jet Foam Wasp & Hornet Killer 544g (
2) Doktor Doom Pyrethrin Powder Insecticide 600g
3) WHY Reusable Wasp and Hornet Trap

Directions For Use:

Insert the straw into the wasp foam nozzle (attached to the side of the can). From a distance 5-10 ft away, depress the nozzle and aim the foam at the large entrance hole at the bottom of the nest. Check the rest of the nest for any other entrance//exit points and foam those closed too. If it is safe to do so, pierce the nest with the straw and inject foam agent into the nest. This Multiple areas should be injected with the foam. Keep the entrance/ exit holes topped up with foam to prevent any wasps exiting the nest.

After letting the foam agent kill off the nest, remove the nest and or put a bag around it, pull it off and tie it closed to ensure no wasps escape. Scrape off as much of the excess nest from the area. Once this is done, apply a generous amount of the pyrethrin powder to the nesting area and the surroundings. This will remain active and kill off any of the wasps that fly back to the site.

Once this process is complete, install the WHY wasp trap in the general area that the nest was in. This will capture any wasps that were out during the treatment. This will also help prevent any other colonies from establishing a new nesting site.


 

$70.00

plus applicable taxes.

Exterior Wasp Nest Removal Kit Details:

How to Use

Insert the aiming straw (attached to the side of the bottle) into the penetration point on the nozzle of the Jet Foam Wasp & Hornet Killer. Position yourself 5-10 ft away from the targeted nest, aim the nozzle and spray the foam at the entrance point(s) of the nest (usually at the bottom of the nest). If it is safe to do so, penetrate the straw nozzle and spray foam agent directly into the nest. Do this in multiple areas to ensure. should be injected with the foam. It is best to re-apply spray the main entrance point(s) of the nest to reduce the number of wasps or hornets exiting the nest.

After allowing the Jet Foam Wasp & Hornet killer agent to get absorbed in the nest (5-10 minutes), use the provided disposable gloves and plastic disposal bag to remove the wasp nest (do this by playing the bag around the nest, pulling it off and allowing it to fall into the bag. Tie the bag shut to avoid any remaining wasps or hornets to fly out.

Apply a generous amount of Pyrethrin Powder Insecticide powder to the nesting area and the surroundings. This will remain active and kill any wasps or hornets that may return back to the nesting area. 

Once the above has been completed, install the Reusable Wasp and Hornet Trap in the area where the nest was. This will capture any remaining wasps or hornets from the removed nest. This will also help prevent any other wasp or hornet colonies from establishing a new nest in the area.

Where to Use

This unit is specifically designed for exterior applications but can also be used in an interior space.

We offer the Interior Wasp Removal Kit for any wasp or hornets nests which have been established in a crack or crevice of a building.

Pests to Use

Wasps, hornets
Manufacturer  Doktor Doom; WHY

 

 

Wasp and Hornet Nest Removal Kit